Basic information of Double Orifice Air Release Valve

This valve is a pipeline will be matched equipment, apply to the temperature does not exceed 100 ℃ water, hot water pipe on the pipe from the air.

Features of Double Orifice Air Release Valve  

1. Body is provided with a shock-proof inner tube to protect the float;

2. Lower water pressure can be closed to prevent drainage;

3. When there is negative pressure, the piston quickly opens to breat

4. Stainless steel floating ball, long life.

Principle of Double Orifice Air Release Valve

This valve exhaust, buoy, by gravity pull down one end of the lever, the lever in the tilt state at this moment, in the leverage and vent contact appeared gap, air through the vent through the gap, with the air discharge, water level rise, buoy under the effect of the buoyancy of water float upwards, the lever on the seal face pressure on the porosity, gradually until the vent is completely blocked. The exhaust valve is now completely closed.

Installation and Commissioning of Double Orifice Air Release Valve  

When installing the double orifice air release valve , always install a control valve on the front end to avoid stopping water from being tested. For specific use, please consult ZECO Valve Group.

Product scope, Standards & Materials of Double Orifice Air Release Valve

Size Range: 2"~12"

Pressure Rating: 10bar ~ 25bar

Face to Face Dimensions: AMSE B16.10, EN558-1

Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2  

Coating: Fusion Bonded Epoxy Coating   

Inspection and Test: ISO 5208 / EN 12226-2

ZECO China control valve is widely used in water supply and drainage control systems in the global building market.